86-0391-7251555
South Of Hetang Road, East Of Heshuo Road, Jiaozuo, Henan, China (Mainland)
Huayu | High Potential Magnesium Anode | Standard Potential Magnesium Anode |
ASTM B843-M1C | ASTM B843-AZ63B | |
Aluminium AL | 0.01% max | 5.30 – 6.70% |
Zinc Zn | – | 2.50% – 3.50% |
Iron Fe | 0.03 max % | 0.003 max % |
Copper Cu | 0.02 max % | 0.02 max % |
Manganes Mn | 0.5 – 1.30 % | 0.15% – 0.70% |
Lead Pb | 0.01 max% | 0.3 max % |
Silicon Si | 0.05 max % | 0.10 max % |
Nickel Ni | 0.001 max % | 0.002 max % |
Other | 0.05% each 0.3% max total | 0.3% max total |
Magnesium Mg | Remainder | Remainder |
Huayu | High Potential Magnesium Anode | Standard Potential Magnesium Anode |
ASTM B843-M1C | ASTM B843-AZ63B | |
Open voltage (-V) | 1.70V to -1.75V | -1.50V to -1.55V |
Closed voltage (-V) | -1.58V to -1.62V | -1.45V to -1.50V |
Capacity (A.h/kg) | 1,230 A.h/kg min | 1,230 A.h/kg min |
Efficiency (%) | 50 % min | 50 % min |
Consumption rate (kg/A-y) | 7.90 kg/A-y | 7.90 kg/A-y |
Anodic Protection Ribbon Mg Magnesium Sacrificial Anode
Anodic Protection Ribbon Mg Magnesium Sacrificial Anode
Composition
Relevant data reported that there are many failed lessons for the use of sacrificial anodes. It is believed that the service life of sacrificial anodes will generally not exceed 3 years and up to 5 years. The main reason for the sacrificial anode cathodic protection failure is the formation of a non-conductive hard shell on the anode surface, which limits the anode current output. The main reason for this problem is that the anode composition does not meet the regulatory requirements. Therefore, when we choose the anode, the first concern should be the anode composition problem.
Huayu has 20 years of experience in the procurement of raw materials. We have selected the following three cooperative businesses
Anodic Protection Ribbon Mg Magnesium Sacrificial Anode
Melt We use only one batch of material in one furnace and ingredients are added one by one according to the melting point.
Stirring We use exclusive secret gas stirring.
Anodic Protection Ribbon Mg Magnesium Sacrificial Anode
Assay Before casting each furnace, we perform spectral analysis and chemical analysis of the alloy composition.
Electrochemical properties
The difference between a factory and a factory is actually the difference between production processes. Common problems. The anode composition is acceptable, but the electrochemical performance is not up to the standard. This kind of anode is still unusable.
We've been working hard everyday for 20 years in this industry.We guarantee that every anode produced by huayu is qualified.Welcome third party to enter factory inspection.
Exterior
People rely on clothes and horses rely on saddles. A good anode must have a good appearance, so after each anode is cast, we have to perform a second 360- degree manual sanding.
Dimensions and weight
If the anode is out of size and weight, 90% is a mold problem. Our promise is that if there is any problem with size and weight, we will refund unconditionally and return the freight. In addition, you will be compensated 5% of your total contract price.
You can send an inquiry to get more details about Anodic Protection Ribbon Mg Magnesium Sacrificial Anode at any time.
